Tool

£3

In Stock

1 small sponge which can be used to move molten wax and create interesting textures.

£10

In Stock

4 different small sponges which can be used to move molten wax and create interesting textures.
1 x smooth block.
1 x rough block.
1 x round.
1 x round with hole.

£16

In Stock

Quality hogs hair brushes.
5 different sizes in the set: 2mm, 4mm, 8mm, 12mm, 20mm.
Ideal for painting molten wax.

£29

In Stock

5 piece set of Scrappy Wax Movers.
These are similar to paint brushes, but have soft rubber tools at the end.
They are good for moving molten wax around a picture.
Different sizes and tip shapes.
Paintbrush style design.

£28

In Stock

The rubber brushes are used to move molten wax around, usually on a hotplate, but also work with hot air melted wax. There are two rubber brushes in the assortment. One has a toothed end edge and the other has a solid curved rubber tongue. These tools are very useful and create a variety of effective marks and patterns.

£10

In Stock

The rubber comb is used to move molten wax around, usually on a hotplate but also with hot air melted wax. Each edge has teeth of differing spacing which create sets of lines and spaces; fine, medium or large. It can be flexed into a curve for smaller portions of effect.

£65

In Stock

This kit contains all the materials you need to get started with this exciting art.
1 Encaustic Iron.
16 wax blocks.
30 pieces of white A6 card.
10 pieces of white A5 card.
Scribing tool.
5 language guide booklet.
Strong gift box

The waxes included in this set are the Basic selection:
01 - Crimson
03 - Orange
06 - Leaf Green
08 - Blue Green
10 - Ultra Marine Blue
12 - Red Violet
13 - Rust Brown
15 - Black
16 - White
23 - Olive Green
24 - Pink
27 - Clear
31 - Pastel Blue
44 - Mid Yellow
46 - Cyan Blue
48 - Purple

If you add the Enhancing and Enrichment sets you will have one of each of the 48 available colours

good as part of an initial setup for Encaustic Art

£38

In Stock

This electrically powered Stylus Pro wax graphics tool will enable detailed application and working with the wax colours. It works as a pen, a brush and an icon and mark making tool. The twin heat control with an on/off switch on the handle (active red light on handle too) makes life easy and the work is very controllable and enjoyable. The threaded tip fixing system offers quick tip changes and allows many tip and head types to be used. Check out the tips and heads available in the tools section.

Size: 200mm x 32mm diameter (without any tip fitted)
Lightweight Cable: 1400mm long (approximately)
It comes complete with:
1 x Drawing Tips
1 x Wire Brush Head
1 x Oblong Tip

good as part of an initial setup for Encaustic Art

£40

In Stock

240v, 180w, UK Plug.
Travel iron design.
Thermostatic control.
Can be used as a mini hotplate.
Lightweight design.
This iron is the most popular tool for creating encaustic art wax pictures.
It has a smooth plate, flared edges and a point at the front.
The iron can be easily converted into a mini hotplate

£5

In Stock

Brass scribing tool.
A double ended tool which is pointed at one end and bladed at the other.
This is good for detailed graphics, inscribing, scratching etc.
Approx 115mm long.
Double ended.

£6

In Stock

The drawing tip is a split nib which enables creation in molten wax colours of lines, spots or any drawn shape with any type of shading or blending. It is threaded to fit the encaustic art Stylus Pro wax graphics tool, and accompanies that tool when purchased, as one of the standard tips. If you want controlled graphical ability in encaustic art then this is the tip to use. Great for getting inside bigger pieces of work or for creating from scratch. A lower temperature slows wax flow, makes the wax thicker and enables sharper edges to occur. For blending and colouring-over with molten wax a warmer tip allows faster working.

£6

In Stock

The wire brush tip is a collection of crimped braided wire that behaves like a brush or marker pen. It is great for painting and covering areas with molten wax colour. Bunches of the wires can be bent aside to create thinner brush forms. To avoid crumpling the fine wires too much try resting the heel of the metal stem against the wax so that the melting wax floods down onto the fibres. It is threaded to fit the encaustic art Stylus Pro wax graphics tool, and accompanies that tool when purchased, as one of the standard tips. Ideal for filling areas of encaustic colour, for blending wax colours, for painting in shapes, texturing and dappling the waxes too.