Books & DVDs
A2+ Hotplate with thermostatic control
240V, 400W, UK Plug.
A2+ Hotplate with thermostatic control.
The ultimate Encaustic Art heat tool.
Opens up a whole range of new possibilities and techniques.
Work area approx 405mm x 605mm.
Encaustic Art Stylus Pro
This electrically powered Stylus Pro wax graphics tool will enable detailed application and working with the wax colours. It works as a pen, a brush and an icon and mark making tool. The twin heat control with an on/off switch on the handle (active red light on handle too) makes life easy and the work is very controllable and enjoyable. The threaded tip fixing system offers quick tip changes and allows many tip and head types to be used. Check out the tips and heads available in the tools section.
Size: 200mm x 32mm diameter (without any tip fitted)
Lightweight Cable: 1400mm long (approximately)
It comes complete with:
1 x Drawing Tips
1 x Wire Brush Head
1 x Oblong Tip
Metal Scribing Tool
Brass scribing tool.
A double ended tool which is pointed at one end and bladed at the other.
This is good for detailed graphics, inscribing, scratching etc.
Approx 115mm long.
5 Scrappy Wax Movers
5 piece set of Scrappy Wax Movers.
These are similar to paint brushes, but have soft rubber tools at the end.
They are good for moving molten wax around a picture.
Different sizes and tip shapes.
Paintbrush style design.
Encaustic Art Rubber Comb
The rubber comb is used to move molten wax around, usually on a hotplate but also with hot air melted wax. Each edge has teeth of differing spacing which create sets of lines and spaces; fine, medium or large. It can be flexed into a curve for smaller portions of effect.
Encaustic Art Rubber Brush Set
The rubber brushes are used to move molten wax around, usually on a hotplate, but also work with hot air melted wax. There are two rubber brushes in the assortment. One has a toothed end edge and the other has a solid curved rubber tongue. These tools are very useful and create a variety of effective marks and patterns.
Encaustic Art Starter Set - Gift Box
This kit contains all the materials you need to get started with this exciting art.
1 Encaustic Iron.
16 wax blocks.
30 pieces of white A6 card.
10 pieces of white A5 card.
5 language guide booklet.
Strong gift box
The waxes included in this set are the Basic selection:
01 - Crimson
03 - Orange
06 - Leaf Green
08 - Blue Green
10 - Ultra Marine Blue
12 - Red Violet
13 - Rust Brown
15 - Black
16 - White
23 - Olive Green
24 - Pink
27 - Clear
31 - Pastel Blue
44 - Mid Yellow
46 - Cyan Blue
48 - Purple
If you add the Enhancing and Enrichment sets you will have one of each of the 48 available colours
5 Brush Pack - hogshair 2mm, 4mm, 8mm, 12mm, 20mm
Quality hogs hair brushes.
5 different sizes in the set: 2mm, 4mm, 8mm, 12mm, 20mm.
Ideal for painting molten wax.
4 Sponge Set - 2 x block, 2 x round
4 different small sponges which can be used to move molten wax and create interesting textures.
1 x smooth block.
1 x rough block.
1 x round.
1 x round with hole.
1 Encaustic Sponge Nr 2 Rough Orange
Drawing Tip - No. 1
The drawing tip is a split nib which enables creation in molten wax colours of lines, spots or any drawn shape with any type of shading or blending. It is threaded to fit the encaustic art Stylus Pro wax graphics tool, and accompanies that tool when purchased, as one of the standard tips. If you want controlled graphical ability in encaustic art then this is the tip to use. Great for getting inside bigger pieces of work or for creating from scratch. A lower temperature slows wax flow, makes the wax thicker and enables sharper edges to occur. For blending and colouring-over with molten wax a warmer tip allows faster working.
Wire Brush Tip - No. 2
The wire brush tip is a collection of crimped braided wire that behaves like a brush or marker pen. It is great for painting and covering areas with molten wax colour. Bunches of the wires can be bent aside to create thinner brush forms. To avoid crumpling the fine wires too much try resting the heel of the metal stem against the wax so that the melting wax floods down onto the fibres. It is threaded to fit the encaustic art Stylus Pro wax graphics tool, and accompanies that tool when purchased, as one of the standard tips. Ideal for filling areas of encaustic colour, for blending wax colours, for painting in shapes, texturing and dappling the waxes too.
Your basket is empty